CLUSTER TYPE DRESSERS
Technical Specification
Cluster type diamond dressers made from small special quality crystal character, rough diamonds. We used special bond for sintering these diamonds for longer life. These dressers are more economical than single point diamond dressers. The diamonds can be fully utilized without re sharpening. These dressers can give rapid dressing without scoring and produce a consistent even surface on the grinding wheel.
Guidelines
• Angle should 90° to the grinding wheel.
• Normal wheel speed should be used with smaller cutes.
• Good quality of coolant should be used.
Applications
• Ideal for coarse or rough dressing of grinding wheels in sizes up to 80 grit.
• Ideal for grinding to eliminate imbalance.
| Size | CT. WT (approx.) | Code No. |
| 5/D | 1.25 |
 |
| 7/D | 1.75 |
 |
| 9/D | 2.00 |
 |
| 12/D | 3.50 |
 |
| Classifications | MICRON | Code No. | Colour Code | Guide for recommended use |
| For operations requiring precise finishes and tolerances |
 |
D-1 | Blue | Metallographic finish on steel & very high finish of steel and hard metals. |
| D-2 | Blue | For finish Tungsten Carbide dies, mirror polish on steel and hard steel moulds and gauges etc. | ||
| Final finishing grades for moulds dies seals, flat lapping and production lapping |
 |
D-3, D-4 | Green | Mirror polish and high finish on tungsten carbide, finest polish on sapphire, ruby, steel etc |
| D-5, D-6, D-7, D-8 | Yellow | Medium Polish on steel, Tungsten Carbide and Diamond | ||
| D-10, D-14 | Orange | Removal of working scratches on steel prepolishing of steel and soft metals. Medium polish on Tungsten Carbide, Pre-polishing on sapphire and ruby | ||
| Grade for pre-finishing hard metallic and non metallic materials tungsten carbide ceramics etc. |
 |
D-15, D-20, D-25 | Pink | Rapid stock removal with better finish on steel and Tungsten Carbide |
| D-30, D-40 | Brown | Uniform stock removal on steel, Generation of uniform surface and medium cutting on Tungsten carbide | ||
| Maximum stock removal for hogging and rigging operations in extremely hard materials |
 |
D-50, D-60 | Red | Fast Stock removal on Tungsten Carbide and any hard metal & enlarging the bore of Drawing Dies |
| D-80, D-100 | Black | For Speedy cutting on Tungsten Carbide & steel and any metal |
Diamond Compound is available in standard & high concentration in 5 gm syringe packing in oil & water soluble.
| GRADE MIC. SIZE | COLOUR CODE |
| 1/2-1 1-2 1-3 2-4 2-6 |
WHITE |
| GRADE MIC. SIZE | COLOUR CODE |
| 4-8 8-12 15-25 20-30 30-40 40-60 |
YELLOW |